Current Configuration Commands - HP 34970A User Manual

Chapter 5 Remote Interface Reference
SCPI Command Summary

Current Configuration Commands

(see page 224 for more information)
Valid only on channels 21 and 22 on the HP 34901A multiplexer module.
CONFigure
range
:CURRent:DC [{<
resolution
[,< >|MIN|MAX|DEF}],] (
CONFigure? [( @ < ch_list >)]
[SENSe:]
CURRent:DC:RANGe {<
CURRent:DC:RANGe? [{(
CURRent:DC:RANGe:AUTO {OFF|
CURRent:DC:RANGe:AUTO? [(
[SENSe:]
CURRent:DC:RESolution {<
CURRent:DC:RESolution? [{(
[SENSe:]
CURRent:DC:APERture {<
CURRent:DC:APERture? [{(
[SENSe:]
CURRent:DC:NPLC {0.02|0.2|
CURRent:DC:NPLC? [{(
CONFigure
:CURRent:AC [{< range
resolution
[,< >|MIN|MAX|DEF}],] (
ch_list
CONFigure? [( @ < >)]
[SENSe:]
CURRent:AC:RANGe {<
CURRent:AC:RANGe? [{(
CURRent:AC:RANGe:AUTO {OFF|
CURRent:AC:RANGe:AUTO? [(
[SENSe:]
CURRent:AC:BANDwidth {3|
CURRent:AC:BANDwidth? [{(
This command redefines the scan list when executed.
Default parameters are shown in bold.
190
AUTO
>| |MIN|MAX|DEF}
scan_list
@ <
range >|MIN|MAX}[,( @ < ch_list
@ < ch_list >)|MIN|MAX}]
ON @ ch_list
}[,( <
ch_list
@ < >)]
resolution
>|MIN|MAX}[,(
@ < ch_list >)|MIN|MAX}]
time >|MIN|MAX}[,( @
@ < ch_list >)|MIN|MAX}]
1 |2|10|20|100|200|MIN|MAX}[,(
@ ch_list
< >)|MIN|MAX}]
>| AUTO |MIN|MAX|DEF}
@ scan_list
<
range ch_list
>|MIN|MAX}[,( @ <
@ < ch_list >)|MIN|MAX}]
ON }[,( @ < ch_list
@ ch_list
< >)]
20
|200|MIN|MAX}[,(
ch_list
@ < >)|MIN|MAX}]
>)
>)]
>)]
ch_list
@ < >)]
< ch_list >)]
@ < ch_list
>)
>)]
>)]
@ ch_list
< >)]
>)]