Call Handling Features; Conference - Avaya 4610SW User Manual

Using Your 4610SW IP Telephone

Call Handling Features

The features described in this section are available while calls are in progress.
Use the dedicated Feature buttons on the telephone itself, or administered
Feature buttons available using the 4610SW's softkeys, as applicable.

Conference

The Conference feature allows you to conference up to the maximum number of
parties set by your System Administrator.
Adding another party to a call
1. Dial the first party, then press the Conference (
The line's display area changes to white text with a dark gray background.
The current call is placed on hold, the Soft Hold (
you hear a dial tone.
2. Dial the number of the next party and wait for an answer.
3. Press the Conference (
call.
4. Repeat Steps 1- 3 for each party you want to conference in to the call.
Adding a held call to the current call
1. Press the Conference (
The icon on the current line changes to the Soft Hold (
2. Press the Line/Feature button of the held call.
3. Press the Conference (
All parties are now connected.
Dropping the last person added to the call
Press the Drop (
The last party connected to the conference call is dropped from the call.
) button again to add the new party to the
) button.
) button again.
) button.
Issue 2.0 December 2003
Call Handling Features
) button.
) icon displays, and
) icon.
2-7