Setting The Message Display Rate; Setting Visual Alerting - Avaya 4610SW User Manual

Application Options

Setting the Message Display Rate

Although rare, the call server can send messages to your phone that are longer
than the display area. If this occurs, the first, and then the second part of the
message display for a specific time interval.
The Message Display Rate can be either Fast (display interval is 2 seconds) or
Slow (display interval is 3 seconds). The default rate is Slow.
1. To change this option, press the corresponding Line/Feature button.
2. Press the Line/Feature button for the next setting you want to change or
save this setting by pressing the Save softkey. (To restore the previous
setting without changing it, press the Cancel softkey.)
Upon saving, the first Options Main screen displays.

Setting Visual Alerting

When this option is set to No (the default), ringing is the only notification of an
incoming call. When set to Yes, your phone rings and your voice message
indicator light flashes to alert you to an incoming call.
1. To change this option, press the corresponding Line/Feature button.
2. Press the Line/Feature button for the next setting you want to change or
save this setting by pressing the Save softkey. (To restore the previous
setting without changing it, press the Cancel softkey.)
Upon saving or cancelling, the first Options Main screen displays.
6-6
Issue 2.0 December 2003
4610SW IP Telephone Options