Charging Batteries - Comdial Air Imact User Manual

Multi cell wireless telephone for non-comdial telephone systems
Table of Contents

Advertisement

Battery Operations
11.3

Charging Batteries

Handset batteries are Nickel Metal Hydride (NiMH) and support 4 hours
of talk time and 40 hours of standby time (on and available for calls).
The battery charger charges a handset and spare battery. Charging takes
approximately 2 hours.
To charge a battery,
1. Remove the handset carrying case if it has one.
2. Insert handset (power off) with battery in the front pocket of the
charger.
3. Insert spare battery in the rear pocket of the charger.
The front pocket LED changes to amber and then changes to red to
indicate that rapid charging is in progress.
If a spare battery is in the rear pocket, the rear pocket LED changes
to amber while waiting for the handset to finish charging or
alternates between green and amber to indicate discharge is in
progress.
One battery is charged at a time. When the handset is fully
charged, the front pocket LED changes to green and the rear
pocket LED changes to red to indicate that rapid charging is in
progress.
4. When LEDs change to green, remove the handset or spare battery.
When charging of a handset or battery is complete, the charger
switches to trickle charge until you remove the handset or battery.
11 – 4 MCW Handset User's Guide
GCA70–353

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcw-hsDxpDxp plusDsuDsu iiFx series

Table of Contents