Table of Contents
Advertisement
D Receiving a Distress Relay Acknowledgement
When a Distress Relay Acknowledgement is received:
➥ The emergency alarm sounds.
➥ "
" and the LCD backlight blink.
• Push [CLR] to stop the beeps and the backlight blinking. ("
continues to blink.)
➥ "DTR RLY ACK" appears on the display, then Channel
16 is automatically selected.
This action can be changed, depending on the combi-
nation of the Auto Switch function and Auto Tune timer
settings. See pages 46 and 47 for more details.
25W
TAG
Received
DTR RLY ACK
<John
<CLR ˘
Beep Off>
NOTE: The alarm does not sound within 1 hour from re-
ceiving the distress relay or distress relay acknowledge-
ment call if receiving the duplicate call.
INT
CALLING
D Receiving an Individual Call
When an Individual Call is received:
➥ The emergency alarm or beeps sound depending on the
received category.
"
➥ "Received Individual" appears on the display.
➥ "
" and the LCD backlight blink.
➥ Push [CLR] to stop the beeps and the backlight blinking,
then push [DIAL•ENTER] to reply to the call and select
the channel specified by the calling station for voice com-
munication (depending on your situation; see page 25 for
details of the Individual Acknowledgement procedure.);
push [CLR] to ignore the call.
•
"
" continues to blink.
Received
Individual
<Paul
<CLR ˘
Beep Off>
DSC OPERATION
25W
INT
TAG
SAFETY
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
37
Advertisement
Table of Contents
