D Receiving An Individual Call - Icom GM600 Instruction Manual

8
DSC OPERATION
■ Receiving DSC calls (Continued)

D Receiving an Individual call

NOTE: When the "Individual
ACK" item is set to "Auto," the
transceiver automatically sends an
acknowledgement. Both the TX and
RX calls are stored in the Transmitted
and Received Call Logs. (pp. 69, 70)
q When an Individual call is received:
• Alarm sounds.
• The following screen is displayed
and the backlight blinks.
• " " is displayed and "
w Push any [Alarm Off]
e Select your desired action.
58
[Hold]: Holds the RX call task,
and return to the previous
screen.
[ACK (Able)]:
Sends an acknowledgment
without any changes.
[Accept]: Enters the DSC Task mode.
To send the acknowledgement,
push [Accept]
" blinks.
DSC Task mode
• Rotate [CH/ENT] to view the call
contents.
• See page 28 for details of the Task
mode's software key functions.
.
When you select [Accept] in step e,
you can send an acknowledgement
in the DSC Task mode. To send the
acknowledgement, go to step r.
If you return to the Main screen
without sending the acknowledgement,
go to step i.
r Push [≈] to scroll the software key
functions.
.
t Push the desired key to select an
acknowledgement option.
y Push [Call]
acknowledgement.
u Depending on the option selected
in step t, hold down [PTT] to
communicate.
i Push [Standby Mode]
to the Main screen.
TIP: When you send the
acknowledgement, select one of three
options, depending on your situation.
See page 44 for details of the
Individual acknowledgement
procedures.
to send the Individual
to return