Icom IC-M504A Instruction Manual page 58

7
OTHER FUNCTIONS
■ Automatic Foghorn function (Continued)
q While holding down [H/L], push [HAIL•RX
the foghorn.
˘UNDERWAY
STOP
<ENT
w Rotate [DIAL] to select the desired foghorn pattern, then
push [DIAL•ENTER].
• 'UNDERWAY,' 'STOP,' 'SAIL,' 'TOW' are selectable. (p. 51)
• Even if [DIAL•ENTER] hasn't been pushed, the selected foghorn
pattern is set, and the display automatically changes to the next
step after 5 seconds of inactivity.
52
] to activate
25W INT
TAG
˘
OK> CALLING
e Rotate [DIAL] to adjust the foghorn level, then push
[DIAL•ENTER].
• The foghorn level is adjustable in 31 steps.
• Even if [ENT] hasn't been pushed, the selected foghorn level is
set, and the display automatically changes to the next step after
5 seconds of inactivity.
25W INT
Rotate
TAG
FOGHORN
15
˘
<ENT OK> CALLING
The selected foghorn
pattern is displayed.
r To return to normal operating mode, hold down [HAIL•RX
for 1 second.
When a DSC Call is received, the Automatic Foghorn func-
tion is automatically cancelled. The received call type is
displayed on the LCD. (p. 35)
Push
25W INT
TAG
FOGHORN
15
UNDERWAY CALLING
]