Table of Contents
Advertisement
D MMSI code check
The programmed 9 digit MMSI (DSC self ID) code can be
checked.
q Enter "MMSI Check" in the DSC Set up menu.
➪
DSC Menu
Set up
(Push [MENU])
(Rotate [DIAL], then push [DIAL•ENTER].)
w Check the 9 digit MMSI (DSC self ID) code.
--DSC Menu--
MMSI Check
123456789
<CLR ˘ Exit>
e Push [CLR] to return to the DSC Set up menu.
r Push [CLR], or rotate [DIAL] to select "Exit" then push
[DIAL•ENTER], to return to the DSC menu.
• Repeat step r again to return to the normal operating mode.
➪
MMSI Check
D Automatic Acknowledgement
This item sets the Automatic Acknowledgement function to
ON or OFF.
When a Position Request, Position Report, Polling Request
or Test Call is received, the transceiver automatically trans-
mits a Position Reply, Position Report Reply*, Polling Reply
or Test Acknowledgement Call, respectively.
*Only when the received Position Report call requires a reply.
q Enter "Position Auto ACK" in the DSC Set up menu.
➪
DSC Menu
Set up
(Push [MENU])
(Rotate [DIAL], then push [DIAL•ENTER].)
w Rotate [DIAL] to turn the Automatic Acknowledgement
function ON or OFF.
--DSC Menu--
Position Auto ACK
˘ON
OFF
<CLR˘Exit / ENT ˘ OK>
e Push [DIAL•ENTER] to set and return to the DSC Set up
menu.
• Push [CLR] to cancel and return to the DSC Set up menu.
r Push [CLR], or rotate [DIAL] to select "Exit" then push
[DIAL•ENTER], to return to the DSC menu.
• Repeat step r again to return to the normal operating mode.
6
DSC OPERATION
➪
Position Auto ACK
(Default: ON)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
45
Advertisement
Table of Contents
