Table of Contents
Advertisement
9
CONNECTIONS AND MAINTENANCE
■ Connections
q
w
e
r
t
Do not
loose!
y
q NMEA IN LEAD (Red)
Connects to a GPS receiver for position data.
• A NMEA0183 ver. 2.0 or 3.01 (sentence formatters RMC, GGA,
GNS, GLL and VTG) compatible GPS receiver is required. Ask
your dealer about suitable GPS receivers.
w NMEA OUT LEAD (White)
Connects to a PC or navigation equipment (NMEA0183
ver. 3.01 sentence formatters DSC, DSE compatible) for
position data received from other ships.
56
!0
o
i
u
Outer conductor
: NMEA IN (−)
Inner conductor
: NMEA IN (+)
Outer conductor
: NMEA OUT (−)
Inner conductor
: NMEA OUT (+)
e EXTERNAL SPEAKER LEAD (Yellow)
Connects to an external speaker.
r HAILER/FOGHORN (–) LEAD (Black)
Connects to a hailer speaker (25 W nominal at 13.8 V/
4 ˘).
t HAILER/FOGHORN (+) LEAD (Blue)
Connects to a hailer speaker (25 W nominal at 13.8 V/
4 ˘).
y ANTENNA CONNECTOR
Connects a marine VHF antenna with a PL-259 connector
to the transceiver.
CAUTION: Transmitting without an antenna may dam-
age the transceiver.
u GROUND TERMINAL
Connect this terminal to a vessel ground to prevent electri-
cal shocks and interference from other equipment occur-
ring. Use a self-tapping screw (3 × 8 mm.)
i EXTERNAL MICROPHONE JACK
Connect the optional Command microphone. (p. 62)
Outer conductor
: Speaker (−)
Inner conductor
: Speaker (+)
Advertisement
Table of Contents
