Table of Contents
Advertisement
D Programming Group ID
q Enter "Add:Group ID" in the DSC Set up menu.
➪
DSC Menu
Set up
(Push [MENU])
(Rotate [DIAL], then push [DIAL•ENTER].)
w Rotate [DIAL] to input the group ID and ID name.
• The group ID is a unique number that you create for your group.
The ID name is an associated text name for that group.
• Push [16•9] to move the cursor forward, or [CH/WX•DUAL•U/
I/C] to move it backward.
• Push [CLR] to cancel and return to the DSC Set up menu.
• "Full ID" appears when 100 DSC address IDs are already set.
• After inputting the 8 digit code, push [DIAL•ENTER] or [16•9] to
edit the ID name.
The first digit is specified as '0' for a Group ID.
The first two digits are '0' for any Coast station ID.
--DSC Menu--
Add:Group ID
Input 8 digits
0________
Input name
_________
<CLR ˘ Exit / ENT ˘ OK>
e After inputting the ID name, push [DIAL•ENTER] to pro-
gram.
r Push [CLR], or rotate [DIAL] to select "Exit" then push
[DIAL•ENTER], to return to the DSC menu.
• Repeat step r again to return to the normal operating mode.
➪
Add:Group ID
D Deleting Group ID
q Enter "DEL:Group ID" in the DSC Set up menu.
➪
DSC Menu
Set up
(Push [MENU])
(Rotate [DIAL], then push [DIAL•ENTER].)
• When no address ID is programmed, "No ID" is displayed. In
this case, push [CLR] to exit.
w Rotate [DIAL] to select the desired ID name to delete.
--DSC Menu--
Select ID
Icom
Group A
˘Group B
Group C
<CLR ˘ Exit / ENT ˘ OK>
e Push [DIAL•ENTER] to delete the selected group ID and
return to the DSC Set up menu.
r Push [CLR], or rotate [DIAL] to select "Exit" then push
[DIAL•ENTER], to return to the DSC menu.
• Repeat step r again to return to the normal operating mode.
6
DSC OPERATION
➪
DEL:Group ID
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Advertisement
Table of Contents
