D Programming Group Id - Icom IC-M505 Instruction Manual

D Programming Group ID

q Push [MENU] to enter the DSC menu.
w R o t a t e [ C H A N N E L ] t o s e l e c t " S e t u p ," p u s h
[CHANNEL•ENTER].
--DSC Menu--
Select Item
Position Report
Polling Request
Received Calls
Distress Setting
˘Set up
Exit
e Rotate [CHANNEL] to select "Add:Group ID," push
[CHANNEL•ENTER].
--DSC Menu--
Set up
Add:INDV ID
˘ Add:Group ID
DEL:INDV ID
DEL:Group ID
Offset Time
MMSI Check
r Rotate [CHANNEL] to set the group ID and ID name.
• The group ID is a unique number that you create for your group.
The ID name is an associated text name for that group.
• Push [16•C] or [DIAL•DUAL/GRP] to move the cursor forward
or backward, respectively.
• Push [CLR] to cancel and return to the set up menu.
• "Full ID" appears when 100 DSC address IDs are already set.
• After entering an 8-digit ID code, push [CHANNEL•ENTER] or
[16•C] to enter a 10-character ID name.
• 1st digit '0' is fixed for a group ID.
--DSC Menu--
Add:Group ID
Input 8 digits
0________
Input name
_________
<CLR˘Exit / ENT˘OK>
t After inputting, push [CHANNEL•ENTER] to program.
y Push [CLR] or rotate [CHANNEL] to select "Exit," push
[CHANNEL•ENTER].
• Returns to the DSC menu.
• Repeat again to return to the normal operation condition.
6
DSC OPERATION
6
19