Limit Of Number Of Copies; Black Streaking Reduction Processing - Kyocera TASKalfa 181 Operation Manual

Limit of Number of Copies

Set the limit of the number of copies that can be set at a time.
1 Display the Copy Default screen. (See
2 Press the key or the
3
Press the Enter key.
4
Use the numeric keys to set the maximum number of
copies (1 to 999).
5 Press the Enter key.
6 Press the Reset key. The message display returns to the copier basic screen.

Black Streaking Reduction Processing

If black streaks (streaks that are not contained in the original image) appear on copies from the
optional document processor, you can make black streaking less noticeable. Since the black
streaking reduction processing reduces the reproducibility of fine characters, it is normally
recommended to use the factory default setting.
1 Display the Copy Default screen. (See
2 Press the key or the
line.
3
Press the Enter key.
4 Press the key or the
Strong.
Note
To use the black streaking reduction processing, first select Weak. If black streaking is not reduced,
select Strong.
5 Press the Enter key.
6
Press the Reset key. The message display returns to the copier basic screen.
How to Display the Copy Default Screen
key to select Copy Limit.
How to Display the Copy Default Screen
key to select Corr. Black
key to select None, Weak or
Copy Default :
Margin Width
BorderEraseWidth
Copy Limit
Copy Limit:
999 Sets
# keys
Copy Default :
BorderEraseWidth
Copy Limit
Corr. Black Line
Correct. Fine black line :
None
*
Weak
Strong
System Menu
on page 3-2.)
: 1/4"
: 1/4"
: 999 Set
on page 3-2.)
: 1/4"
: 999 Set
: None
3-11