Program Function; Registering A Program - Kyocera TASKalfa 181 Operation Manual

Copier Functions

Program Function

Up to eight combinations of copy modes and functions displayed on the operation panel can be
registered as a single program.

Registering a Program

1 Set the desired copy modes, etc., to be registered.
2 Press the Program key.
3
Press the
program.
4 Press the Enter key.
5 Press the
number to register (1 to 8).
Note
You can also select the program number using a numeric key.
6 Press the Enter key. The program is registered.
Using a Program to Make Copies
1 Press the Program key.
2
Press the
number to recall.
Note
You can also select the program number using a numeric key.
3
Press the Enter key.
4
Set the originals and press the Start key. Copying starts with the settings that were registered.
1-18
key or the key to select Register
key or the key to select the program
key or the key to select the program
Program:
Program #7
Program #8
Register program .
Register program :
Program #1
Program #2
Program #3
Program:
Program #1
Program #2
Program #3