Kpdl Error Printing - Kyocera TASKalfa 181 Operation Manual

Printer Settings

KPDL Error Printing

The details of any error that occurs during printing in the KPDL emulation mode can be printed.
Continue the procedure from step 9 of
1 Press the
Errs.
2 Press the Enter key.
3
Press the
you set On, the details of any error will be printed.
4 Press the Enter key.
5 Press the Reset key. The message display returns to the printer basic screen.
KPDL (AUTO) Alternative Emulation Selection
If you set KPDL (AUTO), switching between KPDL and an alternative emulation mode will be
automatically performed according to print data. Continue the procedure from step 9 of emulation
mode selection to set this item as shown below.
Available emulation modes: PCL6, KC-GL, Line Printer, IBM Proprinter, DIABLO 630,
EPSON LQ-850
1
Press the
Emulation.
2
Press the Enter key.
3 Press the
emulation mode.
4 Press the Enter key.
5
Press the Reset key. The message display returns to the printer basic screen.
2-22
key or the key to select Print KPDL
key or the key to select On or Off. If
key or the key to select Alt.
key or the key to select the desired
Emulation Mode Selection
KPDL
Back
Print KPDL Errs
Print KPDL Errs
Back
On
Off
KPDL(AUTO)
Back
Alt. Emulation
Print KPDL Errs
Alt. Emulation
Back
PCL 6
KC-GL
to set this item as shown below.