Multi Purpose Tray Settings; Paper Size; Machine Management Code Change - Kyocera TASKalfa 181 Operation Manual

System Menu

Machine Management Code Change

You can change the four-digit management code for security management.
Note
If you change the management code, be sure not to forget it. If you forget the management code,
contact you service representative.
The management code at the factory default setting is 1800 for the 18 ppm model and 2200 for the
22 ppm model.
1 Display the Machine default screen. (See
page 3-12.)
2 Press the
MachineAdmin Code and than press the Enter key.
3 Enter the new management code using the numeric
keys, and than press the Enter key.
4
Press the Reset key.
The message display returns to the copier basic screen.

Multi Purpose Tray Settings

Set the following items for feeding paper from the multi-purpose tray.

Paper Size

Set the size of paper to be used from the multi-purpose tray. You can use irregular size paper by
inputting the size.
Note
If the paper size is unknown or no particular paper size setting is required, select Universal
Size.
Selecting a Size from Regular Sizes
Sizes that can be set:
Inch Specification — 11 × 17" (Ledger), 8
11 × 8
Metric Specification — A3, B4, A4R, A4, B5R, B5, A5R, B6R, A6R, 8
Folio
1 Press the System Menu/Counter key.
2 Press the
setting.
3
Press the Enter key.
3-26
key or the key to select
", 5 × 8 " (Statement), A4R, A4
1/2 1/2 1/2
key or the key to select MP Tray
How to Display the Machine Default Screen
Machine Default :
Auto Clear Time
Silent Mode
MachineAdminCode
Machine Admin . Code Change :
# keys
× 14" (Legal), 8 × 13" (Oficio II), 8
1/2 1/2
System Menu / Counter :
End
Language
MP Tray Setting
: 90 Sec.
: On
: 1234
1800
× 11" (Letter),
1/2
× 11" (Letter), 11 × 8
1/2
on
",
1/2