SECTION 7—SEAT AND ARMS
Adjusting Seat Height
NOTE: For this procedure, refer to FIGURE 7.2.
1. Remove the seat. Refer to Removing/Installing the Seat on page 27.
2. Remove the mounting bolt, two curved washers and lock nut securing the seat post to
the frame tube.
3. Align the frame tube mounting hole with one of three seat post mounting holes to
achieve desired seat height.
4. Using the mounting bolt, two curved washers and locknut, secure the seat post to the
frame tube.
5. Install the seat. Refer to Removing/Installing the Seat on page 27.
Curved
Washers
Mounting Bolt
Lynx™L-3X
FIGURE 7.2 Adjusting Seat Height
28
Seat Post
Frame Tube
Curved
Washers
Locknut
Part No. 1145807