Engaging/Disengaging The Brake Release Lever - Invacare Lynx L-3X Owner's Operator And Maintenance Manual

SECTION 6—OPERATION OF THE POWERED SCOOTER

Engaging/Disengaging the Brake Release Lever

Ensure that the brake-release lever is in the engaged position before driving. There
should be an audible "click" when stopping and starting the scooter.
NOTE: For the following procedure, refer to FIGURE 6.2.
The brake release lever manually engages and disengages the brake. The brake release
lever is located under the seat on the right side.
The brake must be engaged in normal driving conditions. Activation of the throttle
control lever automatically releases the brake so that the powered scooter can drive.
Releasing the throttle control lever automatically engages the brake to prevent the
powered scooter from rolling on its own.
When the brake release lever is disengaged and the key is removed, the powered scooter
can be pushed. The powered scooter cannot be driven with the brake in the disengaged
position.
1. To Engage the Brake Release Lever (Drive) ‐ Push the brake release lever down.
2. To Disengage the Brake Release Lever (Push) ‐ Pull the brake release lever up.
Pull Up to
Disengage
(Push)
Brake Release
Lever
Push Down to
Engage
(Drive)
FIGURE 6.2 Engaging/Disengaging the Brake Release Lever
Lynx™L-3X
WARNING
26
Part No. 1145807