SECTION 10—BATTERIES
Connecting/Disconnecting the Battery Cables
WARNING
Battery terminal configuration shown below MUST be used. Batteries that have the
reversed terminal configuration MUST NOT be used - otherwise serious injury or
damage may occur.
NEGATIVE (-)
DO NOT USE
NEGATIVE
Battery Terminal
(-) Battery
Terminal
POSITIVE
(+) Battery
POSITIVE (+)
Terminal
Battery Terminal
NEVER allow any of your tools and/or battery cable(s) to contact BOTH battery
terminal(s)/post(s) at the same time. An electrical short may occur and serious
personal injury or damage may occur.
The use of rubber gloves and chemical goggles and face shield is recommended
when working with batteries.
Do not remove fuse or mounting hardware from the POSITIVE (+) RED battery
cable/mounting screw.
NEVER defeat or bypass any fuse. ONLY replace with a fuse of the same rating.
NOTE: For this procedure, refer to FIGURE 10.3 on page 39.
37
Part No. 1145807
Lynx™L-3X