Adjusting Seat Height
NOTE: For this procedure, refer to FIGURE 4.3.
NOTE: The seat post has three (3) height settings.
1. Remove the seat. Refer to Removing/Installing the Seat on page 19.
2. Remove the mounting screw, locknut,
and two (2) washers securing the seat
post to the frame post.
3. Align one (1) of the three (3) seat post
mounting holes with the frame post
mounting hole to achieve desired seat
height (FIGURE 4.3).
4. Using the mounting screw, locknut,
and two (2) washers, secure the seat
post to the frame post.
5. Install the seat. Refer to Removing/
Installing the Seat on page 19.
Removing/Installing the Seat Pivot
NOTE: For this procedure, refer to FIGURE 4.4.
Removing
1. Remove the seat. Refer to Removing/
Installing the Seat on page 19.
2. Remove the four (4) mounting bolts
and washers that secure the seat pivot
to the seat.
Installing
1. Install the four (4) mounting bolts and
washers to secure the seat pivot to the
seat. Securely tighten.
2. Install the seat. Refer to Removing/
Installing the Seat on page 19.
Part No 1122167
17" Mounting
Hole
18"
Mounting
Hole
19" Mounting
Hole
FIGURE 4.3 Adjusting Seat Height
Seat Pivot
Washers
Mounting
Bolts
FIGURE 4.4 Removing/Installing the Seat
21
SECTION 4—SEAT
Seat Post
Seat
Washers
Mounting
Bolts
Pivot
Zoom 300 and Zoom 400