Release Lever; Seat Rails - Invacare Meteor Service Manual

Invacare
®
engage by turning slightly.
3. Let release lever go
7.1.7

Release lever

Caution:
Risk of crushing when working on slide rails, adjustment levers and
springs!
Disassembly
1. Dismantle seat (see section 7.1.2).
2. Turn the seat round with the backrest folded down.
3. Loosen the release lever hex nut located under the
seat support.
4. Disengage the torsion springs and replace release
lever.
Reassembly
1. Reassembly takes place in reverse order to disassembly.
7.1.8

Seat rails

Disassembly
Caution:
Risk of crushing when working on slide rails, adjustment levers and
springs!
1. Dismantle seat (see section 7.1.2).
2. Turn the seat round with the backrest folded down.
3. Loosen the handwheel beneath the seat, pull the
armrest supports with the armrests out to the side.
4. Unscrew all four hex nuts from the seat support and
remove the seat support.
5. Unscrew the Allen screws on the seat edge rails
and replace the seat rails.
20
Meteor
Service Manual