Sleep Modes - Sonos Multi-Room Music System User Manual

Sonos Multi-Room Music System User Guide
5-4
(Your Controller will awaken in a matter of seconds after you place it into the cradle. In a rare, but still normal case, your Controller
may need a few minutes to wake up.)
After at least one ZonePlayer has been set up, follow the instructions on the Controller's screen to add this Controller to your Sonos
Multi-Room Music System.

Sleep Modes

Light Sleep
Your Controller will go into light sleep to preserve the battery life when it is unused for a specified period of time. The screen will
turn off until motion is detected or a button is pressed. Use the Sleep Timer Docked (Controller is connected to power supply) and
Undocked (Controller is not connected to power supply) settings to select the amount of time after which your Controller will enter
light sleep.
Deep Sleep
Your Controller will go into deep sleep to preserve the battery life when it is unused for a specified period of time. When your
Controller wakes from deep sleep - either from the motion sensor or from a button press - it will go through a restart cycle that takes
several seconds. Use the Deep Sleep Timer setting to select the amount of time after which your Controller will enter deep sleep.