Your Telephone Call Features; Use Handsfree Calling (M3902, M3903, And M3904) - Nortel Meridian M3901 User Manual

Your telephone call features

Your system administrator assigns features to your programmable feature keys.
Whenever this guide describes a procedure that requires special codes ask your
system administrator to provide these to you.
To access a feature, you press a Feature Key, or enter a Flexible Feature Code
(FFC) or Feature Access Codes (FAC) for the Meridian SL-100. Your system
administrator supplies you with Flexible Feature Codes or Feature Access Codes.
Note: In order to use a feature described in this section, your system software must
support the feature and the feature must be assigned to your telephone. Check
with your system administrator for more details.

Use handsfree calling (M3902, M3903, and M3904)

If your telephone is a M3902, M3903, or M3904 you can use the built-in
microphone and speaker instead of the handset for a handsfree call. While on an
active call, you can switch between Handset and Handsfree mode.
To answer a call with handsfree:
To discontinue a handsfree call:
/
Goodbye
To mute a handsfree call:
/
Mute
/
Mute
To switch from handsfree to handset:
Your telephone call features
Press the Handsfree
on a handsfree call.
Press the
Goodbye
1. Press the Mute
indicator flashes.
2. Press the
Mute
two way handsfree conversation.
1. Lift the
handset
handsfree to handset.
2. Replace the
handset
Button. You are now
Key to end the call.
Key. The LED
Key again to return to a
to switch from
to end the call.
11