Your Telephone Call Features; Use Handsfree Calling (M3902, M3903, And M3904) - Nortel Meridian M3901 User Manual

Your telephone call features

Your telephone call features
Your network administrator assigns features to your programmable feature keys.
Whenever this guide describes a procedure that requires special codes ask your
network administrator to provide these to you.
To access a feature, you press a Feature Key, or enter a Flexible Feature Code
(FFC) for the Meridian 1 or a Feature Access Code (FAC) for the Meridian SL-100.
Your network administrator supplies you with the Flexible Feature Codes or
Feature Access Codes for your system.
Note: In order to use a feature described in this section, your system software must
support the feature and the feature must be assigned to your telephone. Check
with your network administrator for more details.

Use handsfree calling (M3902, M3903, and M3904)

If your telephone is an M3902, M3903, or M3904 you can use the built-in
microphone and speaker instead of the handset to make of receive a handsfree
call. While on an active call, you can switch between Handset and Handsfree
mode.
To answer a call with handsfree:
To discontinue a handsfree call:
/
Goodbye
To mute a handsfree call:
/
Mute
/
Mute
To switch from handsfree to handset:
10
Press the
Handsfree
on a handsfree call.
Press the Goodbye
1. Press the Mute
flashes.
2. Press the
Mute
two way handsfree conversation.
1. Lift the
handset
handsfree to handset.
Key. You are now
Key to end the call.
Key. The LED indicator
Key again to return to a
to switch from