Use Conference Call Feature (M3901); Activate Ring Again (M3901) - Nortel Meridian M3901 User Manual

Operate the main features on the M3901

Use Conference Call feature (M3901)

To add another party to an established call follow these steps:
To use the Conference Call feature:
/
Features
+
/
Features
+
/
Line

Activate Ring Again (M3901)

If you receive a busy tone or no answer when you try to reach someone in your
private network, Ring Again gives you audible tone notification when that person
is available or has used their telephone. The Ring Again feature allows you to
automatically redial the number.
To activate the Ring Again feature:
102
1. Press the
Fx
Note: The first party already on the line is
automatically put on hold and you receive
a dial tone.
2.
3. Press the
Fx
Note 1: To add more parties to the
conference (up to six), repeat steps 1-3)).
Note 2: Press the
make an error while dialing the number or
if you receive a busy signal, the Goodbye
Key disconnects you from the call.
4. Press the
1.
Features
pad number key for Conference.
the number of the party you want
Dial
to add to the call.
Feature Key and the
number key for Conference again to
include all parties to the active call.
Goodbye
Line (DN) Key to return to the
original call.
a number and receive a busy tone
Dial
or no answer.
Key and the
dial
dial pad
Key, if you