Use Call Park - Nortel Meridian M3901 User Manual

While on an active call

Use Call Park

Call Park allows a call to be held temporarily, to be retrieved from any telephone.
You can park an incoming call and page the called party. When you use Call Park
you do not tie up a line. Your system administrator can set up a System Park DN
where most calls get automatically parked.
If configured network wide, Call Park can be used across networks.
To Park a call on the System Park
Extension or your own DN:
Park
To park a call on a DN other than the
System Park Extension or your own
DN:
Park
Park
To park a call using the SPRE code or
FFC/FAC:
Trans
or
28
While on an active cal,
press the
If there is a System Park DN, the call
automatically parks on the System Park
DN. Otherwise, it parks on your DN.
Note: On the Meridian SL-100, press the
Park Key and you receive a confirmation
tone. Press the Park again or the
Goodbye Key.
1. Press the
2.
3. Press the
Note: On Meridian SL-100, press Directed
Call Park (DCPK) Key. Dial the DN where
you want to park the call. Press DCPK
again.
1. Press the
Conf
Key.
Park
Park Key.
the DN where you want to park
Dial
the call.
Key again.
Park
Transfer
Conference Key.
Key or press the