While On An Active Call; Place A Call On Hold; Transfer A Call - Nortel Meridian M3901 User Manual

While on an active call

This section describes features that you can use while on an active call.

Place a call on Hold

Use the Hold feature when you are on the line with one party and a second call
comes in on a second line. You can answer the second call and retain the original
call by putting it on Hold.
To place a call on Hold:
/
Hold
To retrieve a call on hold:
2498

Transfer a call

The Transfer a call feature is used to redirect a call to the appropriate person.
To use the Transfer feature to direct a
call to a third party.
Trans
M3904 or M3903
/
Transfer
Press the
flashes beside the line on hold.
Note 1: If Automatic Hold is on, the active
call is automatically put on Hold when you
answer the second call. On the Meridian
SL-100 Automatic hold is the default.
Note 2: The caller hears music while on
hold, if the music feature is on your system.
Press the
LCD indicator.
1. Press the
is on hold and you receive dial tone.
The LCD indicator lights steadily.
M3902
2.
Dial
transferring the call.
While on an active call
Hold Key. The LCD indicator
(DN) Key beside the flashing
Line
Transfer Key The other party
the number where you are
25