Call Page (Connect) To Make An Announcement; Centrex/Exchange Switchhook Flash - Nortel Meridian M3901 User Manual

Additional Call Features

Call Page (Connect) to make an announcement

To connect to the Call Page allows you to make an announcement over the page
system. To make a page call, dial the page trunk access code.
Note: When the Page Key is used on an attendant console it overrides the
telephones; the telephones disconnect and must re-access the page trunk.
To connect to the Call Page:
To disconnect the Call Page:
/
Goodbye

Centrex/Exchange Switchhook Flash

Centrex/Exchange Switchhook Flash allows you to signal the Central
Office/Exchange (CO) during an established call to use a Centrex service such as
call transfer or three-way calling.
To use Centrex/Exchange Line
Switchhook Flash:
Flash
/
Goodbye
48
1. Lift the handset.
2. the page trunk access code.
Dial
The connection to the page system is
complete.
3. Make your announcement.
Press the
Goodbye
1. Press the
Trunk Switchhook Flash
You receive special dial tone.
2. Dial the codes for your custom Centrex
feature.
3. Press the Goodbye
Note: The Meridian SL-100 is a central
office based PBX, and this feature is not
available.
.
Key
Key to end the call.
Key