Ptz Control By Client Software - Vista Quantum XTRA Installation And User Manual

4-3. PTZ Control by Client software

While Client software is running select the dome required.
1. Enter the Pan/Tilt mode by pressing the PTZ icon
at the top of the screen.
The Pan/Tilt control window( ) will appear.
2. To move the dome use the arrows buttons;
Left : Pan left, Right : Pan right
Up : Tilt up, Down : Tilt down
3. Press the Z/F mode button( ) on the control window
to change to the Zoom/Focus mode.
The Zoom/Focus control window( ) will appear.
4. To zoom or focus use the arrows buttons;
Left : Focus near, Right : Focus far
Up : Zoom in, Down : Zoom out
Vista QXTRA User and installation manual V1.0
36