Display; Camera Setting - Vista Quantum XTRA Installation And User Manual

1. Display

1-1. Camera Setting

Use this menu to adjust the picture colour and specify cameras as covert (recorded but not
displayed).
Click the camera icon( ) on the left hand to select the desired camera.
[ Camera Setting ]
Each camera can be titled using the mouse and each title can have up to 30 characters.
Use the mouse to select the title to alter, the on screen keyboard will appear, enter the title
followed by the OK button.
[ Camera Covert ]
Camera can be hidden from the viewer in live or play back mode.
Click the check box to hide the camera.
In order to view covert camera in Live or Playback, it needs to be turned off in the menus,
this is requires the necessary user rights.
[ Colour Setting ]
The picture displayed from each camera can be individually adjusted to balance the multi
screen view.
Move the control bar to change the values of Hue/ Saturation/ Contrast/ Brightness.
[ PTZ Setup ]
You can control PTZ cameras via coax or a RS485 connection on the rear of this DVR. The
cameras can have individually selectable protocols with a choice of Pelco-P or Pelco-D etc.
ID : Set the PTZ ID from 1-255.
Protocol : Select a PTZ protocol.
Baud rate : Select a baud rate.
Vista QXTRA User and installation manual V1.0
39