Action - Vista Quantum XTRA Installation And User Manual

2-4. Action

Use this menu to configure the relay settings relating to the event (motion & alarm).
[ Motion Relay operation ]
Relays 1 - 4[ ]
Associate the relays with a channel.
Click the check box to enable each relay.
The associated relays will be on when the motion is detected.
Duration [ ]
This is the time for which the relay will be on. It can be set to 0~999 seconds.
[ Sensor ]
Relay 1-4 [ ]
Associate the relays with a channel.
Click the check box to enable each relay.
The associated relays will be on when a sensor alarm happens.
Duration [ ]
This is the time for which the relay will be on. It can be set to 0~999 seconds.
Preset on alarm
You can enable PTZ camera to move to a preset position when a sensor alarm occurs.
A single alarm input can be used to drive up to 4 PTZ cameras to preset positions or
preset tours.
Select the PTZ camera ( ), PTZ mode( ), preset number( ), screen view( ).
Vista QXTRA User and installation manual V1.0
46