Vista Quantum XTRA Installation And User Manual page 49

Program Update ( )
Always turn off : Playback and Network access while upgrading the unit
The latest firmware version can be upgraded through USB 2.0 Port using Memory Stick or
CD/DVD Media. When a memory stick is connected to the USB port, this symbol
will be shown in the status bar of the screen.
Click the SEL. If the system recognizes the new firmware then, "Confirmation window" will
be displayed on the screen.
Next click the "SEL" on the confirmation window. Processing percentage will be displayed.
The message window will be displayed on the screen after upgrading the program.
Click "POWER" on the message window, the DVR will be rebooted.
Smart ( )
This function is used to keep a check on the health of the Hard disk. The parameters which
can be monitored are:
1. Read/Write errors on the drive
2. Drive temperature.
Smart : Turn to on to enable feature.
Temperature : Using the on screen keyboard set the temperature at which the warning
Message Box : The message box can be turned on or off to give a visible warning.
HDD Overwrite ( )
The hard disk drive can be set to overwrite itself once full or to stop recording, overwrite is
the default setting.
Deinterlace (16)
A choice of OFF, D1 or D2 will be offered
OFF – Optimized for resolution, but shows 2 individual fields so can produce juddering on
moving objects.
D1 – Optimized for moving images, with slight reduction in resolution
D2 – Optimized for resolution but shows integration artefacts on moving objects
Information
The Information Screen shows the hard disk size, current firmware version, IP address and
MAC address.
Vista QXTRA User and installation manual V1.0
is to be reported. (recommended setting 45 )
49