Setup For Dvr Port & Web Server Port Using Ip Sharing Router; Appendix 2 - Vista Quantum XTRA Installation And User Manual

Table of Contents

Advertisement

Appendix 2

Setup for DVR Port & Web Server Port using IP sharing Router
(Port Forwarding)
1. To use IP sharing router, "Dynamic IP" should be set to "OFF".
DVR Port : This can be set to any number between 2000 to 65535.
Web Server Port : This can be set to any number between 2000~65535, as long as it
2. Setup "virtual server" on IP sharing Router
It is for setting virtual server to forward IP which is allotted to DVR.
> For example;
DVR-1, IP : 192.168.10.107, DVR Port : 7000, Web Server Port : 7001
If DVR-1 is configured as above, the virtual server on IP sharing router is as follows.
PC Server Name : DVR-1(IP 192.168.10.107)
Protocol : TCP, Internal Port : 7000, External Port : 7000
PC Server Name : DVR-1 (IP 192.168.10.107)
Protocol : TCP, Internal Port : 7001, External Port : 7001
* For more detail, please refer to relevant IP sharing manual.
„DDNS‟ Setup on IP sharing router
DDNS configuration is not needed in case of fixed IP.
To connect DVR-1 with Internet Explorer,
To connect DVR-1 with CD installer,
Vista QXTRA User and installation manual V1.0
is not the same as the DVR Port number.
http://dvr-1.ddns-dvr.com:7001
http://dvr-1.ddns-dvr.com:7000
80

Advertisement

Table of Contents
loading

Table of Contents