Connecting And Operating Bluetooth Device - Jacuzzi J - 280 Owner's Manual

J-200
4. While the music is playing the remote screen will display and
continually scroll through the following: Title, Song, Artist, Album, Dir,
Music and Track information.
5. For operational functions refer to the "External Media Device
Playback" section.
E. Connecting Your Auxiliary Player Using the 3.5 mm Cable:
1. Plug one end of the cable to "Aux" connection on the
stereo, Figure F.
2. Plug the other end of the supplied cable into the
head phone jack connection on the Apple device/
MP3 Player.
3. Press the Mode button on the remote to "AUX IN."
4. All playback operations are conducted via the
Auxiliary Player. The stereo remote functions do not work on
the external Auxiliary Player (except volume control).
F. Connecting Your Bluetooth Device:
1. Turn power "ON" to the stereo unit.
2. From your Bluetooth device, make sure the Bluetooth setting is "ON."
3. Follow the pairing instructions for your Bluetooth device and connect
to the "BLUEWAVE" device that appears on your screen.
4. If asked for a password, enter the code "0000."
5. The remote LCD screen will display, "BT AUDIO" if the process was
successful.
G. Operating Your Bluetooth Device:
1. Press the seek up or down buttons to scroll through the tracks (on
the remote).
2. Press the volume up or down buttons to adjust volume level between
0 to 30 (on the remote).
3. Any other playback operations are conducted via the Bluetooth
device.
CAUTION
EQUIPMENT DAMAGE!
Never install, remove or operate any electrical device (e.g.
Apple device/MP3/USB/AUX/Bluetooth) while hands are wet
or while sitting partially or fully immersed in the spa!
58
:
RISK OF ELECTRICAL SHOCK OR
USB
AUX
Figure F