Pair Remote - Viper 4706V Owner's Manual

Pair Remote

Remote pairing is a process where the Responder LC remote, and the
in-vehicle system learn the other's encrypted identification, securing
communication between the two from intruders.
Note: Remotes are pre-programmed from the factory.
Prepare the vehicle system to be Paired with a new remote
Turn the key to the On position.
1.
Within 5 seconds press and release 1 time the Control button on
2.
the Control Center.
Within 5 seconds, press and hold the Control button. The status
3.
LED will flash one time and the horn will honk once to confirm the
system is ready for remote pairing.
Release the Control button and proceed below.
4.
Note: If pairing does not result within 60 seconds, the system exits
and the horn honks.
Prepare the new remote to be Paired with the system
1. Make sure the remote control is set for the desired Car 1 or Car
2 operation.
2. Perform the steps under Access menu items section to access the
Pair Remote mode.
3. When the remote beeps 3 times and
remote is ready to pair.
Press the
4.
5. Wait several seconds as the remote generates a security encryp-
tion and sends it to the Control Center. If Pair is successful the
horn honks and the remote control emits several tones. The screen
also displays if the Pairing was successful or failed with corre-
sponding text. If the Pairing has failed, repeat step 4.
26
button.
is displayed the
PAIR
© 2013 Directed. All rights reserved.