Remote Control Command Table; Fault Condition Alerts - Viper 5701 Owner's Manual

Remote Control Command table

Direct Access
Level
Button
Arm/Lock
(Panic)
Disarm/Unlock
Remote Start
Aux/Trunk
AUX
Advance Level,
Change Car
(3 sec), Enter
programming
(8 sec)
*Not available for 1-way companion remote control

Fault Condition Alerts

If, when performing a command, a condition exists that does not al-
low activation of an Alarm feature* or Remote Start feature**, the
LED and a fault tone plays to alert of the fault condition.
* Alarm feature not available when the system status is incorrect
upon receiving the command. (Example: Sensor bypass com-
mand is received when disarmed).
Refer to the notes included in the following command descriptions
that address these faults or go to Feature not Available under the
Remote and System Operations section for more details.
8
x 1
LEVEL 1
Silent Arm Sensor
Bypass
Silent Disarm Remote Valet
Runtime Timer Start
Reset
AUX 1 AUX 2
Temperature Arm Status*
Check*
© 2011 Directed Electronics. All rights reserved.
x 2
LEVEL 2 LEVEL 3
Sensor Silent
Arm
Car Finder
Smart Start
AUX 3
Runtime
Remaining*
x 3 x 4
LEVEL 4
Full Silent
Arm
Defogger
AUX 4