DROP DETECT CALIBRATION
In this procedure, the position of the drop detect sensor relative to the four print cartridges is
calibrated. Four values are calculated and stored in the plotter EEROM.
Perform the drop detect calibration whenever the:
Drop Detect Calibration is accessible through the ª
detect calibration, do the following:
1. Press Enter at the ªStatus º display.
2. Use the arrow buttons to scroll to the ª
3. Simultaneously press the Enter and the Up Arrow buttons to access the ªService
Test º submenu.
4. Scroll to the ª D rop Detect Calib º submenu. Press Enter.
5. Messages in the plotter display will inform you that the calibration is in process and
to press the Enter button after a successful calibration.
Service Tests º menu. To perform the drop
Utilitiesº main menu. Press Enter.
Adjustments/Calibrations
7-7