PERFORMANCE CHARACTERISTICS
Table 1-2 lists the performance characteristics of the plotters.
Accuracy
0.38 mm (0.015 in.) or 0.2% of the specified vector length, whichever is
greater at 23 C (73 F) at 50-60% RH, on HP film (monochrome mode only).
Throughput
D-sized loaded vertically: plain paper
Draft mode
Final mode
Enhanced mode
Resolution
Draft Mode
Final Mode
Enhanced Mode
Margins
Leading and Trailing
Sides
Media Dimensions
Sheet and Roll
Maximum Widths
Roll
Maximum Media Length
SERIAL NUMBER INFORMATION
If the plotter serial number has a lower revision letter than the one shown on the title page,
information in the Product History chapter, Chapter 9, will adapt this manual to that plotter.
1-6
Product Information
Table 1-2. Performance Characteristics
monochrome monochrome
1.8 min.
3.2 min.
6.5 min.
special paper
color
1.8 min.
3.4 min.
2.7 min.
4.3 min.
6.5 min.
8.7 min.
300 dpi addressable
300 dpi addressable
300 dpi addressable (color)
600 dpi addressable (monochrome)
17 mm ( 2mm) (normal plot area),
10 mm (expanded plot area)
5 mm (normal or expanded plot area)
D (A1)-size 619 mm (24 in.)
E (A0)-size 917 mm (36 in.)
150 feet (125 ft. for film)
special paper