Panel Description; I Front Panel-Controller - Icom ID-800H Instruction Manual

1

PANEL DESCRIPTION

I Front panel—controller
!4
q SET•LOCK SWITCH [SET•LOCK]
➥ Enters set mode when pushed.
➥ Switches the lock function ON and OFF when pushed
and held for 1 sec.
w TUNING DIAL [DIAL]
Selects the operating frequency
, the setting of the set mode item and the scanning
(p. 28)
direction .
(p. 43)
e VOLUME CONTROL [VOL]
Adjusts the audio level.
r POWER SWITCH [PWR]
Turns power ON and OFF when pushed and held for
1 sec.
1
q w
!3 !2
(p. 92)
(p. 14)
, memory channel
(p. 12)
(p. 16)
Function display (p. 3)
!1 !0 o i
t MICROPHONE CONNECTOR
Connects the supplied or an optional microphone.
q i
Front panel view
y SQUELCH CONTROL [SQL]
Varies the squelch level.
• The RF attenuator activates and increases the attenuation when
rotated clockwise to the center position and further. (p. 17)
e r
u y t
q +8 V DC output (Max. 10 mA)
w Channel up/down
e 8 V control IN
r PTT
t GND (microphone ground)
y MIC (microphone input)
u GND
i Data IN
(p. 16)