Panel Description; Switches, Controls, Keys And Connectors - Icom IC-V82 Instruction Manual

■ Switches, controls, keys and connectors

q
w
e
A B
FUNC CALL
r
1 2
TONE P.BEEP
4 5
DUP SCAN
7 8
PRIO SET
t
Speaker
y
Microphone
u
i
o
MONI PWR
C D
MR CLR
3
T.SCAN BANK
6 0
SKIP OPT
!0
9
H/M/L ENT

PANEL DESCRIPTION

q CONTROL DIAL [VOL]
*Rotate to adjust the volume level.
w PTT SWITCH [PTT]
Push and hold to transmit; release to receive.
e UP/DOWN KEYS [Y Y ]/[Z Z ]
*Selects the operating frequency.
r KEY PAD (pgs. 4, 5)
Used to enter operating frequency, the DTMF codes, etc.
t ANTENNA CONNECTOR
Connects the supplied antenna.
y [SP]/[MIC] JACK
Connect an optional speaker-microphone or headset, if de-
sired. The internal microphone and speaker will not func-
tion when either is connected.
u FUNCTION DISPLAY (pgs 6, 7)
i SQUELCH/MONITOR SWITCH [MONI]
Push and hold to force the squelch open and set the trans-
ceiver to the squelch level adjustable condition.
o POWER SWITCH [PWR]
Push for 1 sec. to turn the power ON and OFF.
*The assigned function for [VOL] and [Y Y ]/[Z Z ] can be
traded in
INITIAL SET MODE
2
(pgs. 14, 63).
1
2
3