Icom ID-800H Instruction Manual page 21

t OUTPUT POWER INDICATORS
➥ "LOW" appears when low output power is selected.
➥ "MID" appears when middle output power is selected.
➥ No indicator appears when high output power is se-
lected.
y MODE INDICATORS
(p. 15)
➥ "AM" appears while in the AM mode operation.
➥ "NAR" appears while in the FM/AM narrow mode oper-
ation.
➥ "DV" appears while in the digital mode operation.
➥ No indication appears while in the FM mode operation.
• Blinking all indication indicates the FM mode selection while
setting.
u DIGITAL MESSAGE INDICATOR
Blinks when a digital message is received.
• The indication disappears when any key is pushed.
i SQUELCH ATTENUATOR INDICATOR
Appears when the squelch attenuator function is activated.
• The attenuator can be switched OFF in initial set mode. (p. 104)
o MEMORY INDICATOR
(pgs. 11, 28)
Appears when memory mode is selected.
(p. 19)
(p. 83)
(p. 17)
PANEL DESCRIPTION
!0 SKIP INDICATORS
(p. 47)
➥ "~" appears when the displayed memory channel is
specified as a skip channel.
➥ "P ~" appears when the displayed frequency is spec-
ified as a program skip frequency.
!1 MEMORY CHANNEL NUMBER INDICATORS
➥ Shows the selected memory channel number.
➥ Shows the selected bank initial.
➥ "C" appears when the call channel is selected.
➥ "L" appears when the lock function is activated.
!2 PRIORITY INDICATOR
(p. 50)
Appears while priority watch is activated; blinks while the
watch is paused.
!3 WEATHER ALERT INDICATOR
Appears when the weather alert function is activated.
• The either alert function is available with the USA version only.
!4 AUDIO MUTE INDICATOR
Appears when the audio mute function is activated.
• The mute can only be switched ON and OFF from the HM-133
only.
!5 AUTO POWER-OFF INDICATOR
Appears while the auto power OFF function is in use.
1
(p. 28)
(p. 37)
(p. 40)
(p. 14)
(p. 111)
(p. 18)
(p. 107)
1
4