Icom ID-800H Instruction Manual page 96

11
DIGITAL MODE OPERATION
Important!
The set call signs with the "One-touch reply using the call
record" operation as at below left are for temporary opera-
tion only. Therefore, the set call signs will be erased when
another call sign is set.
• Never saved into a call sign memory.
• When "NoCALL" is displayed, the "One-touch reply using the call
record" operation won't be performed.
If you want to save the set call signs, see "Copying the set
call sign contents for temporary operation"
For your information
When the call that is specifying your own call sign is received,
the station and the using repeater call signs being used can
be set for operation automatically.
• When "Auto Received Call sign Set"
stored station call sign in "RXCALL" is set to "UrCALL" au-
tomatically.
• When "Auto Received Repeater Call sign Set"
to ON, the stored station call sign in "RXRPT1" is set to
"RPT2 C" and "RXRPT2" is set to "RPT1 C" automatically.
79
for details.
(p. 79)
is set to ON, the
(p. 99)
is set
(p. 100)
NOTE:
When call sign memories are full
, the call sign is unable to be saved and the function
able)
display shows the following indication.
• When no blank channel is
available in "UrCALL"
• When no blank channel is available
in both "UrCALL" and "RPT1/2 C"
I Copying the call sign
D D Copying the call sign memory contents
This function is convenient when saving additional notes for
areas or unit number/initials
(for mobile operation)
, or modifying a part of the current call
transceivers are available)
sign.
q During VFO mode, push [SET•LOCK] to enter call sign set
mode.
• Rotate [DIAL] to select "CALL" if necessary.
w Push [SET•LOCK] or [S.MW•MW] several times to select
(no blank channel is avail-
• When no blank channel is
available in "RPT1/2 C"
(if several