Installation; Unpacking - Intermec EasyCoder F2 User Manual

Chapter 2

Installation

Unpacking

1
/. Type and quantity may
vary, or labels/ribbon may be
omitted completely, depend-
ing on area of distribution.
8
Before you install the printer, examine the package for possible
damage or missing parts:
• Open the box and lift the printer out.
• Check that the printer has not been visibly damaged during
transportation. Keep the packing materials in case you need to
move or reship the printer.
• Check the label on the printer's rear plate, which gives the
voltage, the part number, and the serial number.
• Check that any options you ordered are included.
• Check that all the accessories are included. As standard, the
box contains:
- Intermec EasyCoder F2 printer
- One set of Quick-Load Guides
- Power cord (at least one depending on model)
- Quality check card
- Cleaning card
- Short strip of labels
- Starter pack of thermal transfer ribbon (thermal transfer
models only)
- Adapter for 3-inch media roll core (only in models fi tted
with a rotating media supply hub)
- This User's Guide
- Supporting software and product information on CD.
• Check that the power cord is appropriate for the local stan-
dard. The printer works within 100 to 240 VAC, 50 to 60
Hz.
European-type
230 VAC plug
If the printer has been damaged in any way during transporta-
tion, complain to the carrier immediately.
If the delivery is incorrect or any parts are missing, report it
immediately to the distributor.
1
1
US/Canadian-type
115 VAC plug
Intermec EasyCoder F2 – User's Guide
GB-type
230 VAC plug