Media Load Tear-Off (Straight-Through) - Intermec EasyCoder F2 User Manual

Media Load
Tear-Off (Straight-through)
Important!
Save the label indicating the
sensitivity number attached to
the media roll. You will need
this number to set the media
sensitivity, see Appendix 2.
1
Open the side door.
Intermec EasyCoder F2 – User's Guide
The EasyCoder F2 can print on labels, tickets, tags, and continu-
ous stock in various forms. This section describes the case when
the media is torn off manually against the printer's tear bar. This
method is also known as "straight-through printing."
Tear-off can be used for:
• Non-adhesive continuous stock
• Self-adhesive continuous stock with liner
• Self-adhesive labels with liner
• Tickets with gaps, with or without perforations
• Tickets with black marks, with or without perforations
2
Turn the printhead lift lever clockwise to raise
Chapter 4
the printhead.
19