Epson EB-1410Wi User Manual page 68

Before Using the Interactive Function
Touch the screen and move to draw on the
projected screen.
Move over the screen without touching to move
the pointer. This is known as "hovering".
Attention
The interactive function operates by infrared communication. Note the
following important points when using this function.
• Make sure there is no strong light or sunlight shining on the Easy Interactive
Function receiver or the projection screen.
• If there is any dust stuck to the Easy Interactive Function receiver, it could
interfere with infrared communication and you may not be able to use the
function normally.
• Do not put paint or any stickers on the cover of the Easy Interactive
Function receiver.
• Install the projector so that the Easy Interactive Function receiver is not too
close to fluorescent lights.
• Do not use an infrared remote control or infrared microphone in the same
room because the Easy Interactive Pen may malfunction.
• The Easy Interactive Function may be interrupted by electromagnetic
interference from nearby equipment (such as electric motors or transformers).
• The Easy Interactive Pen is not waterproof. Do not use it with wet hands, or
in locations where it may get wet.
• Do not hold section (a) of the pen tip of the Easy Interactive Pen, and make
sure this section does not get damaged or soiled. Otherwise, the Easy
Interactive Pen may not work.
68