Epson EB-1410Wi User Manual page 145

List of Functions
Sub-menu
Audio Input Set‐ Audio Input: Sets the audio input when the image source is
up Computer, Video, or USB2.
DisplayPort Audio Input: Sets the input audio when
projecting images from the DisplayPort.
HDMI Audio Input: Sets the input audio when projecting
images from the HDMI port.
When set to Audio1, Audio2, or Audio3, audio is output
from the selected port regardless of the input source as long
as audio is input from the audio input port.
Operation Direct Power On: Set to On to turn on the projector
simply by plugging it in.
When the power cord is plugged in, note that the projector
turns on automatically in cases such as a power outage
being restored.
Sleep Mode: When this is set to On, the power is turned
off automatically when no image signal is input and no
operation is performed within a certain amount of time.
Sleep Mode Timer: When Sleep Mode is set to On, you
can set the time before the projector automatically turns off
within a range of 1 to 30 minutes.
High Altitude Mode: Set to On when using the projector
above an altitude of 1500 m.
Function Sub-menu
Standby Mode Sets the type of standby status.
If you set Networked Standby, you can monitor and
control the projector over a network even if the projector is
in standby mode.
s "Monitoring and Controlling"
If you set A/V Standby, you can perform the following
operations even if the projector is in standby mode.
• Monitoring and controlling the projector over the
network.
s "Monitoring and Controlling"
• Outputting audio from the input port to an external
speaker.
You can also change the volume over a network. Audio
input from DisplayPort, HDMI, USB Display, USB1,
USB2, or LAN cannot be output. Also, audio is not output
when Audio Input is set to Auto and the previous source
that was being used is DisplayPort, HDMI, USB Display,
USB1, USB2, or LAN.
s "Connecting image sources"
• Outputting analog RGB signals from the Computer port
to an external monitor.
Easy Interactive Function: Allows you to use the interactive
USB Type B
function (PC Interactive). USB Display and Wireless Mouse
functions are not available.
USB Display/Easy Interactive Function: Allows you to use
the interactive function (PC Interactive) and USB Display.
The Wireless Mouse function is not available.
Wireless Mouse/USB Display: Allows you to use the
Wireless Mouse function and USB Display. The interactive
function (PC Interactive) is not available.
s "Projecting with USB Display"
s "Using the Remote Control to Operate the Mouse
Pointer (Wireless Mouse)"
s "Operating a Computer from the Projected Screen (PC
Interactive)" p.84
145
Function
p.122
p.122
p.33
p.48
p.108