Epson EB-1410Wi User Manual page 131

Monitoring and Controlling
Button
A/V Mute Turns the video and audio on or off.
s "Hiding the Image and Sound Temporarily (A/V
Mute)"
B
Switch to the image from the selected input source. To display input sources that
are not shown on the screen, click (a) or (b) to scroll up or down. The current video
signal input source is displayed in blue.
You can change the source name if necessary.
C
You can perform the following operations when you click the buttons. To display
buttons that are not shown on the screen, click (c) or (d) to scroll left or right.
Button
Freeze Pauses or resumes image playback.
s "Freezing the Image (Freeze)"
Contrast You can adjust the difference between light and dark in
the images.
Brightness You can adjust the image brightness.
Color You can adjust the color saturation for the images.
Sharpness You can adjust the image sharpness.
Zoom
Click the [z] button to enlarge the image without
changing the projection size. Click the [x] button to
reduce an image that was enlarged with the [z] button.
Click the [
position of an enlarged image.
s "Enlarging Part of the Image (E-Zoom)"
D
[ ], [ ], [ ], and [ ] buttons have the same effects as [
and [ ] buttons on the remote control respectively. You can perform the
following operations when you click the other buttons.
Function
p.105
Function
p.105
], [ ], [ ], or [ ] button to change the
p.107
], [
Button
OK
Menu
Auto
Search
Esc
E
You can perform the following operations when you click the tabs.
Tab
Contact IT Help
Info
Tools
Using the tools window
], [ ],
The following window is displayed when you click the Tools tab on the
operation window. You can use this window to change settings in the
projector that is currently connected.
Function
Performs the same operation as the [
remote control.
s "Remote Control" p.16
Displays and closes the Configuration menu.
If clicked while projecting analog RGB signals from the
Computer port, you can automatically optimize
Tracking, Sync., and Position.
Switches to the image from the input port where video
signals are being input.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.47
Performs the same operation as the [Esc] button on the
remote control.
s "Remote Control" p.16
Function
Displays the Help Desk window. Used to send messages
to, and receive messages from, the administrator using
®
Crestron RoomView Express.
Displays information on the projector that is currently
connected.
Changes settings in the projector that is currently
connected. See the next section.
131
] button on the