Network Functions
Windows Vista: Home Premium/Business/Enterprise/Ultimate
Windows 7: Professional/Ultimate
This section provides an easy explanation of "Connect to a Network
Projector".
Check that the projector and computer are connected to the network, and
perform the following operations.
a
Turn on the projector, and change the source to LAN.
"Automatically Detect Input Signals and Change the Projected
s
Image (Source Search)"
Compatible OS
p.47
b
Start the computer, and then click Start - All Programs -
Accessories - Connect to a Network Projector.
The connection setting screen is displayed.
The projector is identified by inputting its IP address, or by allowing
the OS to automatically identify all of the connected projectors.
c
Once the OS has identified all of the connected projectors, select
the one that you want to use and click Connect.
When the projector password screen is displayed, enter the keyword
shown at the bottom of the LAN standby screen.
Attention
In Whiteboard Mode, the function to connect to a network projector is
disabled. Also, the connection is interrupted if you change to Whiteboard
Mode while connected to a network projector.
a
• You can connect only one projector to a computer.
• When using Network Projector from Options in Windows Meeting
Space, set the colors for the computer screen you are using to the
highest level (32bit). If it is not capable of a 32bit display, a message
is displayed and you cannot connect.
119