Wireless Lan Menu - Epson EB-1410Wi User Manual

List of Functions

Wireless LAN menu

To connect the projector to a computer using a wireless LAN, install the
Wireless LAN unit (ELPAP07).
"Installing the wireless LAN unit"
s
Sub-menu
Set this to On when connecting the projector and a computer via
Wireless LAN
Power a wireless LAN. If you do not want to connect via wireless LAN,
turn it Off to prevent unauthorized access by others.
Set this when connecting to a network via a wireless LAN access
Wi-Fi Protected
point compatible with WPS (Wi-Fi Protected Setup)
Setup
easily connect the projector to the access point and make security
settings.
s "Making a WPS (Wi-Fi Protected Setup) Connection with a
Wireless LAN Access Point "
Sets the wireless LAN system. Normally this should be set to
Wireless LAN
802.11b/g/n. The connection method is selected automatically
Sys.
according to the access point settings.
In an area that does not support 802.11n, only 802.11b/g is
displayed.
p.40
Function
g
. You can
p.120
Sub-menu
Connection Set the connection mode to use when connecting the projector
Mode and a computer via a wireless LAN.
If you select Quick, a small network is created automatically by
the projector and computer. This is used with EasyMP Network
Projection. If SSID Auto Setting is set to On, the projector
becomes an easy access point; if it is set to Off, the network is
created in Ad hoc mode
If you select Advanced, the connection is established in
infrastructure mode
If Connection Mode is set to Quick, when you set this to On, you
SSID Auto Set‐
ting can search for the projector more quickly from among multiple
projectors. SSID is set automatically.
When connecting to multiple projectors from 1 computer in
Quick mode, set this to Off, and set the same SSID in all the
projectors you want to connect to.
SSID Enter an SSID. When an SSID is provided for the wireless LAN
system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters. Set
SSID to blank or ANY to establish an ANY connection.
Search Access When Connection Mode is set to Advanced, you can search for
Point surrounding access points, and set the SSID to be connected from
those access points. Depending on the access point settings, they
may not be displayed in the list. You must set security separately.
s "Search Access Point screen"
Channel You can select the channels used to connect in Quick mode. If
interference from other signals occurs, use a different channel.
To prevent the SSID from being displayed on the LAN Standby
SSID Display
screen, set this to Off.
DHCP You can set whether or not (On/Off) to use DHCP
If this is set to On, you cannot set any more addresses.
Function
g
.
g
through the access point installed.
p.154
g
.
153