Epson EB-1410Wi User Manual page 161

List of Functions
Sub-menu
Self-signed Cer‐ (This item can only be set when Secure HTTP is set to On.)
tificate
The Issued to, Issued by, and Validity period information for
the certificate maintained by the server function in the projector
is displayed. This information is not displayed if Web Server
Certificate is set.
Select Refresh to update the self-signed certificate.
(This item can only be set when Secure HTTP is set to On.)
Web Server Cer‐
tificate
The Issued to, Issued by, and Validity period information on
the certificate set in the projector is displayed. This information
is not displayed when a Self-signed Certificate is set.
Select Clear to delete the stored certificate.
a
• Web Control is used to set certificates.
s "Setting Certificates"
• You can also install digital certificates on the projector from a USB
storage device. However, if you install a certificate from both a USB
storage device and the network, it may not be installed correctly.
Function
p.125
SNMP menu
Sub-menu
SNMP Set to On to monitor the projector using SNMP
the projector, you need to install the SNMP manager program on
your computer. SNMP should be managed by a network
administrator. The default value is Off.
You can register up to two IP addresses for the SNMP trap
Trap IP Address
notification destination.
1/Trap IP Ad‐
dress 2
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 192.0.2.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Set the community name of SNMP. You can enter up to 32 single-
Community
byte alphanumeric characters.
Name
161
Function
g
. To monitor