Epson EB-1410Wi User Manual page 154

List of Functions
Sub-menu
IP Address You can input the IP address
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used. 0.0.0.0,
127.x.x.x, 192.0.2.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask You can input the Subnet Mask
a number from 0 to 255 in each field of the address. However, the
following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Ad‐ You can input the IP address for the gateway for the projector.
dress
You can enter a number from 0 to 255 in each field of the address.
However, the following Gateway addresses
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
To prevent the IP address from being displayed on the LAN
IP Address Dis‐
Standby screen, set this to Off.
play
This is a specific string of the wireless LAN module.
Region Code
Function
g
assigned to the projector.
g
for the projector. You can enter
g
cannot be used.
Search Access Point screen
Detected access points are displayed in a list.
Sub-menu
Refresh Searches for the access point again.
Indicates an already set access point.
Indicates the access points where security is set.
If you select an access point where security has not been set, the
Wireless LAN menu is displayed.
If you select an access point where security has been set, the
Security menu is displayed. Select a type of security according to
the security settings for the access point.
154
Function